800-Series NSF Approved Turbine Flow Meter Summary
The 800 series flowmeter is designed to give high performance and competitive pricing with 6 flow ranges from 0.05 to 15 L/min. Its totally non-metallic wetted components makes this the ideal choice for the metering of aggressive chemicals including ultra-pure water. The standard inlet tubes are barbed to accept two hose sizes 8mm and 12mm although for OEM use alternatives are available. The bearings are made of sapphire for long life and reliability, the body is moulded PVDF as standard and the ‘O’ ring seal is typically Viton®.
Titan 800 Series NSF Approved Mini Turbine Flow Meter
800-Series NSF Approved Turbine Flow Meter Features
At the heart of the 800 series turbine flow meter is a precision turbine that rotates freely on robust sapphire bearings and contains over-moulded magnets that are detected through the chamber wall by a Hall effect detector. The output is a stream of NPN/PNP pulses that are readily interfaced with most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable operation throughout. There are two temperature options 125°C or 60°C. The 60°C unit is fitted with two LEDs to monitor the power and pulse output, both NPN and PNP transistor outputs are available on each flow meter.
- NSF Certified for Use in Food and Beverage Production
- Turbine Flow Measurement
- Low cost
- PVDF or PP body
- 1- 2% FSD
- Sapphire bearings
- Hall Effect sensor
- 6 Flow ranges
- Pulse output (NPN Std)
- Pulse output (PNP Option)
- 10 Bar rating
- VitonTM seal as standard.
- 8mm & 12 mm hose tails
- 0.1% Repeatability
- 4.5 to 24 V dc
- -25°C Min to 125°C Max
- IP67
- Weight: 0.050Kg
The 800 Series Turbine NSF Approved Flow Meter is Ideal for
- NSF Approved flow measurement
- Food and Beverage
- Drink dispensing
- Laboratory tests
- Cooling equipment
- Active flow alarms
- Semiconductor plant
800 Series NSF Approved Turbine Flow Meters: Standard Materials of Construction
- Body and cap – PVDF
- ‘O’ Ring Seal – Viton®
- Magnets – Ceramic
- Bearings – Sapphire
Dimensions of the 800 series turbine flow meter
Titan 800 Series Turbine Flow Meter
800-Series NSF Approved Turbine Flow Meters
| #Model . 803 815 845 865 810 824 | Flow range L/Min 0·05-0·5 0·12-1·5 0·2-4·5 0·25-6·5 0·3-10 0·5-15 | Linearity % FSD 2.0 2.0 1.5 1.5 1.0 1.0 | Typical Freq. Hz. 142 175 260 230 235 245 | Approx ‘K’ Factor 17000 7000 3500 2100 1420 980 |
800-Series Turbine Flow Meters: Order Codes
800 Series Mini Turbine Flowmeter (NSF Approved)
e.g. 865-VOP-O is a flow range of 0.25 to 6.5 L/min,
Viton® seal, standard, PVDF bodied flowmeter
with a 6 point traceable water calibration.