1000-Series Turbine Flow Meters
The 1000 series turbine flow meter is designed to give high performance and competitive pricing with 7 flow ranges from 0.05 to 30 L/min. Its choice of body materials makes this the ideal choice for the metering of aggressive chemicals, including ultra-pure water. The standard inlet is a ½'BSPF although for OEM use alternatives are available. The bearings are made of sapphire for long life and reliability, the body is either PVDF or 316 stainless steel and as standard the 'O' ring seal is Viton®.
1000-Series Turbine Flow Meters
At the heart of the 1000 series turbine flow meter is a precision turbine that rotates freely on robust sapphire bearings and contains over-moulded magnets that are detected through the chamber wall by a Hall effect detector. The output is a stream of NPN pulses that readily interfaces with most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable operation throughout. There are two temperature options 125°C or 60°C. The 60°C unit is fitted with two LEDs to monitor the power and pulse output, both NPN and PNP transistor outputs are available on each turbine flow meter.
- Turbine flow meter
- Low cost
- PVDF – or St St Body
- ±0.75% Reading *
- 1- 2% FSD
- Sapphire bearings
- Hall Effect sensor
- 7 Flow ranges
- Pulse output (NPN Std)
- Pulse output (PNP Option)
- 10 Bar rating
- (40 Bar option)
- Viton® seal as standard
- 0.1% Repeatability
- 4.5 to 24 V dc
- -25°C Min to 125°C Max
- IP67
* When used with our metra-smart instrument
The 1000 Series Turbine Flow Meter is Ideal for:
- Laboratory tests
- Cooling equipment
- Active flow alarms
- Semiconductor plant
- Engine test

900 and 1000 Series Turbine Flow MEters
1000-Series Turbine Flow MetersStandard Materials of Construction
- Body and cap – PVDF or 316 St St
- 'O' Ring Seal – Viton®
- Magnets – Over-moulded
- Bearings – Sapphire

1000 Series Turbine Flow Meter Dimensions

Connections: 1000 series turbine flow meters
1000-Series Turbine Flow Meters
#Model 1003 1015 1045 1065 1010 1024 1000 | Flow range L/Min 0·05-0·5 0·12-1·5 0·2-4·5 0·25-6·5 0·3-10 0·5-15 2.0-30.0 | Linearity % FSD 2.0 2.0 1.5 1.5 1.0 1.0 1.0 | Typical Freq. Hz. 142 175 260 230 235 245 360 | Approx ‘K’ Factor 17000 7000 3500 2100 1420 980 720 |
Please submit your details in order to gain access to the download:
Privacy Statement
1000-Series Turbine Flow Meters: Order Codes

1000 Series Stainless Steel Turbine Flow Meter

e.g. 1065-VOP-O is a flow range of 0.25 to
6.5 L/min, Viton® seal, standard electronics,
PVDF body flowmeter with a standard six point
calibration.