Product Directory
Insertion Turbine
Sight Flow Indicators
Calibration
 |
Flowmeter data pagesTitan flow meters
|
 |
|
The metra-view was specifically designed for computing &
displaying rates and totals from flowmeters or machinery with
pulse or frequency outputs. The instrument will display Resettable
Total, Accumulated Total and flow rate in engineering
units as programmed by the user. Simple PIN protected flow
chart programming with English prompts guide you through
the entire programming routine greatly reducing the need to
refer to the instruction manual. The optional pulse output can
be selected to act as an input pulse repeater serving as a signal
conditioner module or may be programmed as a scaled
pulse output for remote metering. There is a ten point linearisation
for non-linear sensors. The pulse output requires an
external 8 - 24Vdc power supply, the pulse width is autoranging
1:1 defaulting to 300ms maximum. The robust housing
is purposed designed to suit harsh indoor & outdoor industrial
and marine environments. It is weatherproof to P67
(Nema 4X) standards, UV resistant and uses glass reinforced
nylon mouldings with stainless steel screws & viton 0-ring
seals.
Metra Smart Instruments by Titan Enterprises: Self contained meter showing rate and total with a 5 year battery life. 
|
|