Product Directory
Insertion Turbine
Sight Flow Indicators
Calibration
 |
Low Cost Flow
|
 |
|
This multi-range radial flow turbine meter uses a low inertia turbine supported on robust sapphire bearings. It has 15mm compression brass fittings and is available in two flow ranges, 0.25 to 6.5 and 1.5 to 30 litres per minute. There are four standard configurations; The basic sensor fitted with an LED and detector, fitted with a flying lead for 5V or 7-24V use or fitted with a integral adjustable flow switch printed circuit board. The pulse output may be readily interfaced with almost any electronic recording device as it is an open collector transistor with an internal pull up resistor on the basic two models and without the pull resistor on the 7-24V model. Custom leads or connectors are also available for large quantity orders for original equipment manufacturers.
 |
|