Flowmeters: 900 Series flow turbine meter features:
- Low cost
- PVDF or St St body
- 1- 2% FSD or ±0.75% reading*
- Sapphire bearings
- Hall effect sensor
- 6 Flow ranges
- Pulse output
- 10 Bar rating
- Viton seal as std.
- 1/4” BSP connections
- 0.1% Repeatability
- 4.5 to 24 V dc
- 125°C Max
- Flow switch option
- *When used with Metra-smart instrument.
- Ideal for:
- Laboratory tests
- Cooling equipment
- Active flow alarms
- Semiconductor plant
- Engine test
Flowmeters: 900 Series flow turbine meter Order Codes:
Titan flowmeters - 900 Series flow turbine meter
e.g. 965-V O P-O is a flow range of 0.25 to 6.5 L/Min, viton seal , standard, 125°C, PVDF bodied flow-meter with a 6 point traceable water calibration.
Flowmeters: 900 Series flow turbine meter, materials of construction
- Body and cap - St St - PVDF
- ‘O’ Ring Seal - Viton
- Magnets - Ceramic
- Bearings - Sapphire
|
Flowmeters: 900 Series flow turbine meter:
|
The 900 series flowmeter is designed to give high performance and competitive pricing with 6 flow ranges from 0.05 to 15 li-tres per minute. Its choice of materials makes this the ideal choice for the metering of aggressive chemicals including ultra-pure water. The standard inlets are 1/4” BSP F although for OEM use alternatives are available. The bearings are made of sapphire for long life and reliability, the body is either PVDF or 316 stainless steel and as standard and the ‘O’ ring seal is typically Viton™. There are two temperature options 125°C or 60°C. The 60°c unit is fitted with two LEDs to monitor the power and pulse output, both NPN and PNP transistor outputs are available on each flowmeter.
#Model
903
915
945
965
910
924
|
Flow range
L/Min
0·05-0·5
0·12-1·5
0·2-4·5
0·25-6·5
0·3-10
0·5-15
|
Linearity
% FSD
2.0
2.0
1.5
1.5
1.0
1.0
|
Typical
Freq. Hz.
142
175
260
230
235
245
|
Approx
'K' Factor
17000
7000
3500
2100
1420
980
|
Pressure drop Vs flow rate for Titan Flowmeters: 900 Series flow turbine meter |
At the heart of the meter is a precision turbine that rotates freely on robust sapphire bearings and con-tains chemically resistant ceramic magnets that are detected through the chamber wall by a Hall effect detector. The output is a stream of pulses that are readily interfaced with most electronic display or re-cording devices. This combination of materials and technology ensures a long life product with reli-able operation throughout.
|
|
|
|
|
Product Directory
Insertion Turbine
Sight Flow Indicators
Calibration
