Flowmeters: Low cost flow transducer features:
- Economical
- Acetal body
- 1½% FSD
- Sapphire bearings
- Optical sensing
- 2 Flow ranges
- Pulse output
- 15 Bar rating
- Nitrile seal
- 15mm fittings
- 0.25% Repeatability
- Various power options
- 70°C Max
- Flow switch option
- IP 54
- Ideal for:
- Drink dispensing
- Showers
- Cooling equipment
- Dishwashers
- Low viscosity fluids
- OEM applications
Flowmeters: Low cost flow transducer - Order codes
Low cost flow transducer - Grey
- Basic flowmeter 163-000
- 5 Volt with lead 163-009
- 7 - 24 Volt
- with lead 163-010
- Flow switch * 163-011
Low cost flow transducer - Beige
- Basic flowmeter 161-000
- 5 Volt with lead 161-009
- 7 - 24 Volt
- with lead 161-010
- Flow switch * 163-011
* This is a separate order code and must be ordered as an ad-ditional item to the basic flow-meter. The maximum operat-ing temperature of the flow switch version is 55°C.
Flowmeters: Low cost flow transducer - standard materials of construction
- Body and cap - Polyacetal & Nylon
- ‘O’ Ring Seal - Nitrile
- Bearings - Sapphire
- End fittings - 15mm brass compression
|
Flowmeters: Multi range radial flow transducer meter:
|
This multi-range radial flow turbine meter uses a low inertia turbine supported on robust sapphire bearings. It has 15mm compression brass fittings and is available in two flow ranges, 0.25 to 6.5 and 1.5 to 30 litres per minute. There are four stan-dard configurations The basic sensor is fitted with an LED and detector, alternatively it may be fitted with a flying lead for 5V or 7-24V use or even fitted with a integral adjustable flow switch printed circuit board. The pulse output may be readily interfaced with almost any electronic recording device as it is an open collector transistor with an internal pull up resistor on the basic two models and without the pull resistor on the 7-24V model. Custom leads or connectors are also available for large quantity orders for original equipment manufacturers.
Model
Grey
Beige
|
Flow range
L/Min
0.15 - 6.5
1.50 - 30
|
Linearity
% FSD
1.5
1.5
|
Typical
Freq. Hz.
500
600
|
Approx
'K' Factor
4600
1200
|
Pressure drop Vs flow rate for Titan Flowmeters: Low cost flow transducer |
This rotation is detected when a turbine blade crosses a powerful infra-red light beam. The resulting output is a NPN pulse that is readily interfaced with most elec-tronic display or recording devices. The combination of materials and technology ensures a long life prod-uct with reliable operation throughout. The flow switch version has a potentiometer to set the switch point and an LED indicator to indicate flows above this point. The output is a change in logic level that may be readily interfaced with a wide range of moni-toring equipment. Built in hysterisis prevents output jitter at the set point. The pulse output is still available for recording purposes.
|
|
|
|
|
Product Directory
Insertion Turbine
Sight Flow Indicators
Calibration
