Flowmeter data pages

Titan flow meters
Cub 5 flow rate/count meter

Cub 5 rate/counter meter product page
Cub 5 rate/counter meter Installation notes

Flowmeters: Cub 5 multi function counter and rate meter

8 Digit totaliser
5 Digit rate meter
High speed count
IP65 (Nema 4X)
Non volatile memory
9-24V dc operation
Clear 11.7mm LCD
Programmable decimal point
Pulse input
Input filter
0 - 60°C
Competitively priced
Wall mounting option
Optional relay card
Optional red/green backlight
Ideal for:
- Continuous monitoring
- Test rigs
- Consumption metering
- Flow switch

Flowmeters: Cub 5 multi function counter and rate meter: Specification

Display

LCD 8 digit total 6 digits for rate with “R” enunciator 5 program- mable decimal points for both totaliser and rate indicator

Signal inputs

Universal pulse frequency input com- patible with reed switch, Hall effect detector, Voltage pulse. Maximum input frequency 50 to 20Khz depending on sensor type minimum 0.01Hz

Power

9 - 24 V dc

Case

IP66 (NEMA 4X) High impact glass polymer.

Temp

-35°C to +80°C. max

K Factor range

0.0001 - 99.9999

Flowmeters: Cub 5 multi function counter and rate meter - Order codes

CUB5 370-018
Mains PSU 370-019
Relay card 370-020
Backlit CUB5 370-021

Flowmeters: Cub 5 multi function counter and rate meter: Standard Materials of construction

UV resistant glass re-inforced polymer case.

Flowmeters: Cub 5 multi function counter and rate meter:

Cub 5 rate/counter meter Datasheet (PDF download)

Cub 5 rate/counter meter Installation notes (PDF download)
Titan Flowmeters: Cub 5 multi function counter and rate meter

This versatile multi function counter and rate meter can display rate or total or when fitted with a relay card provide rate switch or counter set point. The counter continues to record the total when the rate display is selected. The counter scale factor range is 0.00001 to 99.999999 and the rate meter can display 0.1 to 99999.9 for the selected input fre-quency. The counter and rate meter can both display up to five decimal points. The housing is made from high impact polymer that when in-stalled in a panel seals the instrument to IP65 (NEMA 4X). Connections to the meter are via screwed terminal on the rear. Selectable pulse in-puts ensure no erroneous pulses are recorded by “noisy” switch con-tacts. An optional rear mounted power supply converts the instrument into a mains powered unit and will supply up to 50 mA for the sensor.

The drawings below show the CUB5 with its attached mains power supply and the wall mounted enclosure. The panel cut out is 68.5 X 33.5 mm, the minimum vertical and horizontal pitches are 55 & 75mm the panel thickness must be between 1.3 & 5mm.

Cub 5 General description

This versatile counter rate meter can be programmed for one of eight different count modes and/or rate indication with an op-tional relay card for a total or rate set point. There are two separate count inputs that can be programmed with differing scale factors and the display being the sum, difference, bi-directional etc of these counts. The rate function can be dis-abled, viewed at the touch of the front panel or remote button or automatically periodically displayed as the unit cycles through all of the programmed functions. The optional relay card may be configured as either a rate or count function and be set to either latch, automatically reset or reset itself

after a pre-set time. The user input can be set to accept an ex-ternal input to control some of these functions. If the backlit CUB5 is used the colour of the backlight can be made to change as the set point is reached to offer an immediate visual warning.

Request Call Leave Message Ask Titan

Registered Office Address: Titan Enterprises Ltd, Unit 2, 5A Cold Harbour Business Park, Sherborne, Dorset, DT9 4JW.
Company Registration Number 01599477. Place of Registration Cardiff.